# FSRS parameters for different card types

**URL:** <https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520>\
**Category:** FSRS\
**Created:** [June 27, 2024, 5:26pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520 "2024-06-27T17:26:45Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![remline](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/remline/32/26354_2.png) [@remline](https://forums.ankiweb.net/u/remline)\
**Post date:** [June 27, 2024, 5:26pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/1 "2024-06-27T17:26:45Z")

</div>

I am using Anki to learn Spanish vocabulary. My notes consist of a word and a picture. I like to learn the notes both ways: a Word-\>Picture card and a Picture-\>Word card.

In an effort to improve retention, I switched to FSRS two months ago. However, I am still struggling to reach my desired retention of 85%.

I previously had both card types in a single preset. Since Word-\>Picture is easier than Picture-\>Word, this may not be appropriate. As an experiment, today I split my cards into two separate presets. I hope this will give me more accurate scheduling in the future.

# Single preset FSRS parameters (old)

I optimized these parameters today before splitting the cards.

FSRS parameters: `0.1609, 0.4215, 1.7874, 4.6831, 4.9613, 1.3292, 0.8547, 0.0000, 1.3738, 0.2560, 0.7025, 2.3295, 0.1508, 0.4556, 1.2092, 0.2272, 3.2732`  
Log loss: 0.4334, RMSE(bins): 3.52%

# Split preset FSRS parameters (new)

As demonstrated below, Word-\>Picture was too easy, but Picture-\>Word was too hard.

## Word-\>Picture statistics

Average difficulty: 70%  
Average stability: 1.8 months  
Average retrievability: 91%  
Answer buttons (1 month): Learning 90.3%; Young 90.53%; Mature 92.08%

Newly optimized FSRS parameters: `0.2045, 0.6116, 3.1642, 9.4648, 5.0499, 0.9030, 1.1044, 0.0290, 1.4329, 0.0345, 0.9120, 2.2954, 0.0513, 0.4450, 2.0277, 0.2272, 2.8755`  
Log loss: 0.3081, RMSE(bins): 3.02%

## Picture-\>Word statistics

Average difficulty: 89%  
Average stability: 23 days  
Average retrievability: 90%  
Answer buttons (1 month): Learning 80.87%; Young 80.52%; **Mature 71.14%**

Newly optimized FSRS parameters: `0.1405, 0.2357, 0.5124, 0.8598, 5.2881, 1.0804, 0.7191, 0.0375, 1.1031, 0.5867, 0.4996, 2.2051, 0.0626, 0.4601, 1.3239, 0.2272, 3.2784`  
Log loss: 0.4908, RMSE(bins): **4.10%**

# Conclusion

The Word-\>Picture RMSE improved. Curiously, the Picture-\>Word RMSE got worse. Interesting.

I will monitor my retention in the coming weeks. Most importantly, I need to improve retention for mature Picture-\>Word cards.

As a thought: might it be beneficial for Anki to automatically apply different FSRS parameters to different card types?

---

<div class="post-metadata">

**Author:** ![vaibhav](https://avatars.discourse-cdn.com/v4/letter/v/c68b51/32.png) [@vaibhav](https://forums.ankiweb.net/u/vaibhav)\
**Post date:** [June 27, 2024, 6:33pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/2 "2024-06-27T18:33:33Z")

</div>

> [@remline](#):
>
> The Word-\>Picture RMSE improved. Curiously, the Picture-\>Word RMSE got worse.

You shouldn’t compare RMSE like this. Comparing RMSE makes sense only when the evaluation is done on the same reviews. In this case, the number of reviews becomes roughly half.

For a proper comparison, copy the old parameters into the new presets and then calculate the RMSE for each preset using both old and new parameters.

---

<div class="post-metadata">

**Author:** ![remline](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/remline/32/26354_2.png) [@remline](https://forums.ankiweb.net/u/remline)\
**Post date:** [June 30, 2024, 4:22pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/3 "2024-06-30T16:22:48Z")

</div>

I realized another advantage of using distinct scheduling parameters for distinct Card Types: siblings will more easily be dispersed over time.

---

<div class="post-metadata">

**Author:** ![remline](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/remline/32/26354_2.png) [@remline](https://forums.ankiweb.net/u/remline)\
**Post date:** [July 27, 2024, 7:20pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/4 "2024-07-27T19:20:23Z")

</div>

Here is an update one month after splitting my card types into two separate FSRS presets.

**Word-\>Picture answer buttons (desired retention: 90%)**  
May 27–Jun 27: Learning 90.30%; Young 90.53%; Mature 92.08%  
Jun 27–Jul 27: Learning ‎75.85%; Young ‎88.12%; Mature ‎93.05%

**Picture-\>Word answer buttons (desired retention: 85%)**  
May 27–Jun 27: Learning 80.87%; Young 80.52%; Mature 71.14%  
Jun 27–Jul 27: Learning ‎75.76%; Young ‎82.93%; Mature ‎76.79%

I didn’t “reschedule cards on change” when re-optimizing the parameters. Therefore, much of the past month has been spent studying cards that were not optimally scheduled.

Nonetheless, I am happy to see my Mature retention on the Picture-\>Word cards increase from 71% to 77%.

Curiously, for both Word-\>Picture and Picture-\>Word cards, my Learning retention has declined to 76%.

---

<div class="post-metadata">

**Author:** ![remline](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/remline/32/26354_2.png) [@remline](https://forums.ankiweb.net/u/remline)\
**Post date:** [August 28, 2024, 4:55pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/5 "2024-08-28T16:55:31Z")

</div>

Here are my updated stats after another month. I only included the picture-\>word stats, since my primary objective in splitting the parameters is to improve mature retention of those cards. It seems a more interesting test case for FSRS.

I am happy to see my mature card retention clawing towards the desired 85%.

**Picture-\>Word answer buttons:**

| Month | Learning | Young | Mature |
| --- | --- | --- | --- |
| Jun (pre-split) | 80.87% | 80.52% | 71.14% |
| Jul (post-split) | ‎75.76% | ‎82.93% | ‎76.79% |
| Aug (post-split) | 87.70% | 86.99% | 83.85% |

At this point, I am fairly confident that it was beneficial to split these cards into a separate deck/preset. Back when they shared a preset with the easier word-\>picture cards, FSRS could not schedule these cards for sufficiently frequent review.

There is, however, a potential problem on the horizon: 81% of my cards in this deck have an FSRS Difficulty of 100%. Over time, this might prevent my intervals from increasing. For example, I have several cards with review histories like this:

| Date | Type | Rating | Interval | Ease |
| --- | --- | --- | --- | --- |
| 2024-08-28 | Review | 3 | 11 days | D:100% |
| 2024-08-17 | Review | 3 | 11 days | D:100% |
| 2024-08-05 | Review | 3 | 12 days | D:100% |
| 2024-07-31 | Review | 3 | 5 days | D:100% |

Regardless, as long as my retention is near 85%, I can’t complain!

> **FSRS parameters, last optimized on 2024-07-27:**
>
> 0.1362, 0.2360, 0.5382, 0.9326, 5.8557, 1.5376, 0.9027, 0.0000, 1.2600, 0.5438, 0.6575, 2.2544, 0.0727, 0.4688, 1.3635, 0.2272, 3.1938

---

<div class="post-metadata">

**Author:** ![Expertium](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/expertium/32/24176_2.png) [@Expertium](https://forums.ankiweb.net/u/Expertium)\
**Post date:** [August 28, 2024, 4:59pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/6 "2024-08-28T16:59:25Z")

</div>

> [@remline](#):
>
> Over time, this might prevent my intervals from increasing.

Not quite. Even with 100% difficulty (10 difficulty internally, God I hate this unnecessary conversion), the intervals will still grow, just much more slowly. Plus, as you press Good, difficulty slowly decreases. Plus, you can press Easy.

---

<div class="post-metadata">

**Author:** ![Keks](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/keks/32/20537_2.png) [@Keks](https://forums.ankiweb.net/u/Keks)\
**Post date:** [August 28, 2024, 5:58pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/7 "2024-08-28T17:58:32Z")

</div>

With its parameters, the difficulty will not decrease when you press Good.

---

<div class="post-metadata">

**Author:** ![Expertium](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/expertium/32/24176_2.png) [@Expertium](https://forums.ankiweb.net/u/Expertium)\
**Post date:** [August 28, 2024, 6:46pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/8 "2024-08-28T18:46:56Z")

</div>

My bad, you’re right. Still, difficulty being 100% doesn’t prevent intervals from growing, just makes it slow.

---

<div class="post-metadata">

**Author:** ![remline](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/remline/32/26354_2.png) [@remline](https://forums.ankiweb.net/u/remline)\
**Post date:** [August 28, 2024, 7:14pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/9 "2024-08-28T19:14:00Z")

</div>

With my parameters, I verified in the FSRS Visualizer that:

1. The intervals will eventually increase if I keep answering Good.
2. The Difficulty will remain constant if I keep answering Good. (Actually, this seems to be the case regardless of the parameters.)

So to get longer intervals, I just need to keep answering my cards correctly. 😀

(And perhaps some day I will become so smart that I can answer some cards Easily! 😆)

---

<div class="post-metadata">

**Author:** ![Keks](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/keks/32/20537_2.png) [@Keks](https://forums.ankiweb.net/u/Keks)\
**Post date:** [August 28, 2024, 7:16pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/10 "2024-08-28T19:16:07Z")

</div>

> [@remline](#):
>
> With my parameters, I verified in the FSRS Visualizer that:

It doesn’t work properly.  
Use instead [Fsrs4anki Previewer - a Hugging Face Space by open-spaced-repetition](https://huggingface.co/spaces/open-spaced-repetition/fsrs4anki_previewer)

---

<div class="post-metadata">

**Author:** ![remline](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/remline/32/26354_2.png) [@remline](https://forums.ankiweb.net/u/remline)\
**Post date:** [August 28, 2024, 7:28pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/11 "2024-08-28T19:28:15Z")

</div>

Interesting. Fsrs4anki Previewer seems to confirm the same behavior—if the answer is always Good, a card’s Difficulty remains constant regardless of parameters.

---

<div class="post-metadata">

**Author:** ![Expertium](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/expertium/32/24176_2.png) [@Expertium](https://forums.ankiweb.net/u/Expertium)\
**Post date:** [August 28, 2024, 8:44pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/12 "2024-08-28T20:44:56Z")

</div>

> It doesn’t work properly.

1. What do you mean?
2. Have you reported it to the github guy who made it?

---

<div class="post-metadata">

**Author:** ![Keks](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/keks/32/20537_2.png) [@Keks](https://forums.ankiweb.net/u/Keks)\
**Post date:** [August 28, 2024, 9:36pm UTC](https://forums.ankiweb.net/t/fsrs-parameters-for-different-card-types/46520/13 "2024-08-28T21:36:04Z")

</div>

1. When changing the desired retention, the intervals are counted incorrectly. Although the intervals on the graph are indicated correctly.
2. No, I haven’t
