# Anki glitch showing previous card answer instead of new card

**URL:** <https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482>\
**Category:** Help\
**Created:** [August 19, 2021, 7:57pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482 "2021-08-19T19:57:28Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lane\_Conner](https://avatars.discourse-cdn.com/v4/letter/l/e480ec/32.png) [@Lane\_Conner](https://forums.ankiweb.net/u/Lane_Conner)\
**Post date:** [August 19, 2021, 7:57pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/1 "2021-08-19T19:57:28Z")

</div>

Hi folks,  
I’ve looked all around and tried to find this problem but couldn’t, although I might not be looking in the right places.  
My Anki is glitching on my laptop (PC) - a card will appear, I’ll press spacebar to reveal the answer and its answer will appear. I will then click on a level of difficulty. Instead of a new card popping up, the previous card with answer revealed (i.e., the exact same screen I was just on), shows up again. Then I’ll hit the space bar and the answer for the card that was supposed to be the next card (although it didn’t really appear) will show up.

Any help/guidance would be appreciated. Thanks.

---

<div class="post-metadata">

**Author:** ![dae](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/dae/32/65_2.png) [@dae](https://forums.ankiweb.net/u/dae)\
**Post date:** [August 19, 2021, 11:35pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/2 "2021-08-19T23:35:19Z")

</div>

Changing your video driver in the preferences screen to ANGLE or software may help.

---

<div class="post-metadata">

**Author:** ![Lane\_Conner](https://avatars.discourse-cdn.com/v4/letter/l/e480ec/32.png) [@Lane\_Conner](https://forums.ankiweb.net/u/Lane_Conner)\
**Post date:** [August 20, 2021, 2:13pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/3 "2021-08-20T14:13:22Z")

</div>

I have no idea what that is or what it does, but it has worked to correct the problem so far! Thank you very much for taking the time to reply!!!

---

<div class="post-metadata">

**Author:** ![bisherobhser](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/bisherobhser/32/7686_2.png) [@bisherobhser](https://forums.ankiweb.net/u/bisherobhser)\
**Post date:** [December 25, 2021, 5:56pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/4 "2021-12-25T17:56:10Z")

</div>

Made an account just to say that this worked for me as well and I am so grateful to you because this was annoying the ever living crap out of me.

---

<div class="post-metadata">

**Author:** ![keysquish](https://avatars.discourse-cdn.com/v4/letter/k/5fc32e/32.png) [@keysquish](https://forums.ankiweb.net/u/keysquish)\
**Post date:** [April 29, 2022, 3:52pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/5 "2022-04-29T15:52:32Z")

</div>

Thank you for this, I just tried it and fingers crossed the solution takes.

---

<div class="post-metadata">

**Author:** ![ayudarme](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@ayudarme](https://forums.ankiweb.net/u/ayudarme)\
**Post date:** [July 17, 2022, 3:49pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/6 "2022-07-17T15:49:44Z")

</div>

I tried switching to software using the command prompt and the app wouldn’t launch. I am using version Anki 2.1.50+ Qt6. Are there any other solutions? The problem came with the new update. This problem is occurring on both desktop (Windows) and Anki mobile (iPhone).

---

<div class="post-metadata">

**Author:** ![dae](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/dae/32/65_2.png) [@dae](https://forums.ankiweb.net/u/dae)\
**Post date:** [July 18, 2022, 1:43am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/8 "2022-07-18T01:43:26Z")

</div>

If you have no luck with the -Qt6 version, you could try -Qt5 instead, and try the ANGLE video driver in the preferences.

---

<div class="post-metadata">

**Author:** ![MM100](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@MM100](https://forums.ankiweb.net/u/MM100)\
**Post date:** [August 18, 2022, 3:30am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/9 "2022-08-18T03:30:43Z")

</div>

I am having the same problem after updating to -Qt6 version. How do you enable ANGLE video driver? I don’t have it in my preferences.

 ![Anki glitch](https://us1.discourse-cdn.com/flex002/uploads/anki2/original/2X/d/d0b6eaf391311be5411e546088bd4b70acd7fbb6.jpeg)

---

<div class="post-metadata">

**Author:** ![dae](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/dae/32/65_2.png) [@dae](https://forums.ankiweb.net/u/dae)\
**Post date:** [August 18, 2022, 4:18am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/10 "2022-08-18T04:18:15Z")

</div>

[https://docs.ankiweb.net/platform/windows/display-issues.html#qt6](https://docs.ankiweb.net/platform/windows/display-issues.html#qt6)

---

<div class="post-metadata">

**Author:** ![MM100](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@MM100](https://forums.ankiweb.net/u/MM100)\
**Post date:** [August 18, 2022, 3:39am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/11 "2022-08-18T03:39:40Z")

</div>

I just installed the -Qt6 and started seeing this problem. Every few cards, if I hit Good or Again, it shows the previous card (already answered) instead of advancing to the next card. Anyone else have this issue? I saw some advice online to download ANGLE driver in my preferences, but mine doesn’t seem to have this option? Any help would be appreciated!!  
EDIT: I’m also having an issue where Anki lags for several seconds before advancing to a new card. I’ve never had these issues before.

---

<div class="post-metadata">

**Author:** ![MM100](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@MM100](https://forums.ankiweb.net/u/MM100)\
**Post date:** [August 27, 2022, 3:18am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/12 "2022-08-27T03:18:00Z")

</div>

I did as the link instructed and while the issue has resolved for the most part every so often (every ~100 cards), I bump into the same issue where pressing Good shows the previously answered card.

---

<div class="post-metadata">

**Author:** ![dae](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/dae/32/65_2.png) [@dae](https://forums.ankiweb.net/u/dae)\
**Post date:** [August 30, 2022, 11:51am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/13 "2022-08-30T11:51:21Z")

</div>

The webview is reloaded every 100 cards as it used to leak memory. That may no longer be the case; I will experiment with turning that off in the next beta.

---

<div class="post-metadata">

**Author:** ![Lane\_Conner](https://avatars.discourse-cdn.com/v4/letter/l/e480ec/32.png) [@Lane\_Conner](https://forums.ankiweb.net/u/Lane_Conner)\
**Post date:** [September 13, 2022, 3:51pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/14 "2022-09-13T15:51:39Z")

</div>

So, I am the OP for this topic, and while the ANGLE video driver solution worked for the old version, I have Qt6 and am now having the same problem again. Unfortunately, I have basically zeo programming skillz and don’t understand what this link is telling me to do - or where to do it. So, specifically, my questions are a.) what does this mean - echo software \> %APPDATA%\Anki2\gldriver6, and b.) where do I go to revert to the default behavior and change “software” to “auto”? Any help would be much appreciated! Thanks!

---

<div class="post-metadata">

**Author:** ![dae](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/dae/32/65_2.png) [@dae](https://forums.ankiweb.net/u/dae)\
**Post date:** [September 15, 2022, 2:14am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/15 "2022-09-15T02:14:51Z")

</div>

You need to run cmd.exe, then enter that text into it and press enter. Replace software with auto to revert the change.

---

<div class="post-metadata">

**Author:** ![hay3atp](https://avatars.discourse-cdn.com/v4/letter/h/91b2a8/32.png) [@hay3atp](https://forums.ankiweb.net/u/hay3atp)\
**Post date:** [September 16, 2022, 3:21am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/16 "2022-09-16T03:21:28Z")

</div>

I’m having the same issue as you. I am just switching to the previous version of Anki for now. I went through all of the suggested steps, including restarting Anki and uninstalling and redownloading a few times. I’m done studying for the night, but hopefully tomorrow the issue will be resolved for me. It does throw off your study flow when you see the previous card instead of a new one. Cool that there is a forum for this. Anki is saving my butt in PA school!

---

<div class="post-metadata">

**Author:** ![bcm123](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bcm123](https://forums.ankiweb.net/u/bcm123)\
**Post date:** [January 15, 2023, 12:48pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/17 "2023-01-15T12:48:15Z")

</div>

Hi, i’m having the same issue and as someone mentioned earlier, we don’t all understand software!! Please try give step by step instructions. I have no idea what cmd.exe is or how to run it and the anki support page on display issues on Qt6 that mentions echo software is confusing and not very helpful. I have exams soon and this glitch is really a pain. Please, please help me out!!!

---

<div class="post-metadata">

**Author:** ![ferophila](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/ferophila/32/10566_2.png) [@ferophila](https://forums.ankiweb.net/u/ferophila)\
**Post date:** [January 15, 2023, 3:22pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/18 "2023-01-15T15:22:48Z")

</div>

> [@bcm123](#):
>
> I have no idea what cmd.exe is …

> **[cmd.exe](https://en.wikipedia.org/wiki/Cmd.exe)**
>
> Command Prompt, also known as cmd.exe or cmd, is the default command-line interpreter for the OS/2, eComStation, ArcaOS, Microsoft Windows (Windows NT family and Windows CE family), and ReactOS operating systems. On Windows CE .NET 4.2, Windows CE 5.0 and Windows Embedded CE 6.0 it is referred to as the Command Processor Shell. Its implementations differ between operating systems, but the behavior and basic set of commands are consistent. .mw-parser-output .monospaced{font-family:m cmd.exe intera...

> [@bcm123](#):
>
> … or how to run it

> **[11 ways to open Command Prompt in Windows](https://www.pcworld.com/article/395081/open-command-prompt-in-windows.html)**
>
> If you want to execute a task from the command line in Windows, you first have to open Command Prompt. Here are 11 ways to do that.

Once you have opened it, you enter

> echo software \> %APPDATA%\Anki2\gldriver6

and press Enter.

---

<div class="post-metadata">

**Author:** ![bcm123](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bcm123](https://forums.ankiweb.net/u/bcm123)\
**Post date:** [January 15, 2023, 4:23pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/19 "2023-01-15T16:23:54Z")

</div>

Thanks for replying!

 ![image](https://us1.discourse-cdn.com/flex002/uploads/anki2/original/2X/c/ca789f992844caacf24cd9726371505d831f6cfc.jpeg)

When I press enter what’s supposed to happen and what do I do next? Nothing happens when I press it really

---

<div class="post-metadata">

**Author:** ![ferophila](https://sea2.discourse-cdn.com/flex002/user_avatar/forums.ankiweb.net/ferophila/32/10566_2.png) [@ferophila](https://forums.ankiweb.net/u/ferophila)\
**Post date:** [January 15, 2023, 4:41pm UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/20 "2023-01-15T16:41:52Z")

</div>

You should use _software_ instead of _auto_.

I guess restarting Anki is necessary then.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex002/uploads/anki2/original/1X/8f1279ababc5879d54e4838989f606cfe55af8c7.jpeg) [@system](https://forums.ankiweb.net/u/system)\
**Post date:** [May 1, 2023, 3:58am UTC](https://forums.ankiweb.net/t/anki-glitch-showing-previous-card-answer-instead-of-new-card/12482/21 "2023-05-01T03:58:53Z")

</div>

Closed on May 1, 2023, 3:58am UTC


